max crossover distance must not be set to 0 except in special cases use the default value (0. spindle speed if the spindle speed is driven by the controller, must be set to a valid RPM spindle direction must be set to CW, in your file it is set to OFF the spindle will not start in this case ! to dxf2gcode-users We use inkscape every day and it works perfect with DXFtogcode Here's our standard procedure : de-group ALL objects (ctrl+alt+g) convert all shapes to paths (ctrl+alt+c) - do. If you want to cut your board at the full depth, you must set target depth to -16 and not to -1.6 (the Gcode understand only mm or inch)

are you sure that there is not a mismatch between mm and cm ? and that your style library is called standard- cm.

I see that your plywood board is set to 16mm thick. The file generate 2 passes off 0.8mm depth so it cut from 0 to -1.6mm the cut is done with a continuous spiral in other word the tool go from 0 to -0.8 in a full turn around the shape, maybe it's the reason you think it cut nothing ?

There is some bad settings in your file, but I get toolpaths and GCode even with your settings (see picture)

Inkscape dxf dxf2gcode